Palm Springs Rattan® Features and Benefits

Features and Benefits

All legs meet the ground at a 90° angle. This reduces the stress on the rest of the chair.
The center of each leg is drilled out and a hard wood dowel is epoxied in place.
The center of each hard wood dowel is then drilled out and a nylon sleeve is glued in.
A section of aluminum pipe is hammered over 1" of the bottom of each leg to prevent expansion.
Each leg is leather wrapped to enhance the tropical look
A metal washer is placed between the snap-in castor and the nylon insert to prevent wear on the nylon insert
A non-marking dual wheel caster is used on all legs to help the chair move over grout lines and through carpet.

This dual wheel caster also gives the chair two pressure points per leg reducing stress on the casters.